Hydranautics SWC5 MAX Seawater Membrane Supplier Dubai, UAE

Home | Products | Hydranautics SWC5-MAX Seawater Membrane

Hydranautics SWC5-MAX Seawater Membrane

Hydranautics SWC5 Max RO membrane is designed to offer the perfect combination of high flow, superior salt and boron rejection with low operating pressures.

Hydranautics SWC seawater desalination membranes are high productivity elements offering the highest levels of salt rejection and a consistently pure end product. Membrane formulations are designed to accommodate varying levels of seawater salinities worldwide with reliable field-proven performance. The SWC seawater desalination elements has highest levels of salt rejection and a consistently pure end product. Membrane formulations are designed to accommodate varying levels of seawater salinities worldwide with reliable field-proven performance.

Advantages:

99.8% nominal rejection
Up to 9,900 GPD
Highest combination flow, rejection and boron rejection (SWC5 Max)
Up to 440ft2 active membrane area

Specified Performance

Permeate Flow: 9,900 gpd (37.5 m3/d)
Salt Rejection: 99.8% (99.7% minimum)

Test Conditions:

32000 ppm NaCl solution
800 psig (5.5 MPa) Applied Pressure
77 oF (25 oC) Operating Temperature
10% Permeate Recovery
6.5 – 7.0 pH Range

General Product Description

Configuration: Spiral Wound
Membrane Polymer: Composite Polyamide
Membrane Active Area: 440 ft2 (40.9 m2)

Product Use and Restrictions

Maximum Applied Pressure: 1200 psi (8.27 MPa)
Maximum Chlorine Concentration: < 0.1 ppm
Maximum Operating Temperature: 113 oF (45 oC)
pH Range, Continuous (Cleaning): 2-11 (1-13)
Maximum Feedwater Turbidity: 1.0 NTU
Maximum Feedwater SDI (15 mins): 5.0
Maximum Feed Flow: 75 gpm (17.0 m3/h)
Minimum Brine Flow: 12 gpm (2.7.0 m3/h)
Maximum Pressure Drop for Each Element: 15 psi (0.10 MPa)

Features:

High permeate flow
High salt rejection – 99.8% (99.7% minimum)
92% boron rejection
Lowest biological and colloidal fouling
Greater tolerance to high pH cleanings
Lower energy consumption

Hydranautics seawater membranes continuously meet and satisfy the increasing demands of the water purification industry through their high productivity, outstanding performance, salt rejection, productivity and savings. These membranes set high performance standards for the seawater reverse osmosis membrane elements which deliver the highest salt rejection rates available.

SWC5 membranes are designed to provide optimum salt rejection and permeate flows. They are the membranes of choice when lower permeate TDS and lower feed pressures are needed. SWC5 membranes offer highest energy efficiency at lowest costs and are used in the mega desalination plants.